We have an excellent technical team, our products in quality and quantity will make you satisfied, welcome to buy.
Views: 0 Author: Site Editor Publish Time: 2025-02-05 Origin: Site
Attention Points for Maintenance
1) Do not run the engine for a long time in poor exhausting and ventilating conditions. Ensure to keep the working site well vented and free of inflammables. Take a special care when operating with inflammable or noxious substances such as gasoline and refrigeration gas etc. Make sure the working site is well ventilated prior to operation with dangerous substances when working at serve trench or at other closed locations. Do not smoke whiling maintaining the vehicle.
2) Before jacking the vehicle, use chocks or blocks to withstand the wheels for preventing movement of the vehicle body. When the vehicle is jacked up, use safety supporting seat to support the vehicle at the designated right lifting and pulling points before preceding any work.
3) Take care not to drop any heavy parts like engine or gearbox due to loss of balance whiling removing them. And do not allow them to touch the adjacent parts.
4) While starting any checks that do not need storage battery voltage, make sure to turn off the ignition switch and remove the ground wire from the battery for fear of accidental short circuit.
5) Avoid any touch to any hot metal components such as radiator, exhaust pipe; tail pipe and muffler etc., so as to prevent any serious burns. Do not remove the cover radiator when the engine temperature is very high.
6) Prior to vehicle overhauling, use a suitable cover to cover the mudguard and internal ornaments. Pay attention to the keys and buttons etc. you bring or wear and not allow them to scratch the lacquer painting.
7) Before checking or reassembling the parts dismantled, place them first to the specified liquid or solvent for cleaning.
8) Use or replace with new oil seals, gaskets, packing,O-rings, locking washers, split pins, locknuts etc. parts.
9) Replace the bearing cone and bearing cup as a whole when making such replacement.
10) Place the dismantled parts in their assembling location and sequence.
11) Static may cause damages to internal electric elements.
12) When pulling out vacuum tube or air hose, place labels for indication of their correct connections.
13) Use only the lubricate oil as specified in"Maintenance"section.
14) Use the adhesives, sealants allowed or other substitutes in case of need.
15) Use tools designated or recommended for safe and high efficient overhauling.
16) When maintaining fuel, engine oil, cooling water, vacuum and exhaust systems, check all the related pipelines for any leakage.
17) Handle the waste oil or solvent used for parts cleaning in a proper way.
