3.4 Assembling1)Before assembling, spread a film of grease on the spring lining and the shackle2) Assemble the shackle onto the shackle bracket, put side gaskets on both sides of the shackle, insert the shackle pin in, fix the pin bolt, with tightening torque of 30-50N·m.3) Assemble the padding plat
READ MORELast Monday, we welcomed an important client from Burkina Faso. The client arrived at Jining Airport, and our sales manager set out early in the morning. They drove from Jinan to Jining, solely with the intention of greeting the client as promptly as possible and demonstrating our sincerity.After th
READ MORE3.3 Inspection1) Use special measuring instruments or tools for part inspection, Determine whether parts can be used any longer according to the specified Maintenance Table, Repair and replace damaged parts as required, In case of any worn part among mating parts, which makes the clearance exceed th
READ MORE3.2 Cleaning1)Cleaning NotesCleaning is necessary due to accumulation of oil and dirt on the part. Use suitable cleaning methods such as steam purging light oil rinsing, neutral cleanser washing, trichloroethylene steam cleaning and shakable washing solution (magus Solution) used in washing machine.
READ MORE3、Maintenance procedures3.1 Disassembling1)Disassemble shock absorber lower end.2)Disassemble shock absorber upper end and shock absorber itself.3) Loosen U-bolt and nut, then remove U-bolt, cover board, buffe block, and padding plate with absorber lower-end lower pinembly.4) Jack up front axle, sup
READ MORE1. Pressure plate 2.Bushing 3.Suspender4. Stabilizer rod 5. Upper bracket ofsuspender6. Antifrictrion piece 7.Leaf spring pin 8. Flexible shackle 9. Fixed shackle 10.Shackle pin 11. Spring cover12.U-bolt 13. Fixed shackle 14.Clasp15.1st piece of leaf spring 16.2nd piece of leaf spring 17.Upper brack
READ MORE